Vinyl plank floors are one of the most affordable ways to give your home a brand-new look and feel. Vinyl planks don’t require any maintenance other than occasional sweeping or vacuuming them.
However, this doesn’t mean your floor will stay clean for long if you neglect it from time to time. Here are 7 easy steps on how to clean vinyl plank floors.
Table of Contents
Sweep or vacuum daily
Daily sweeping and/or vacuuming is one of the most important things you can do for your vinyl plank floors.
Dust, dirt, and sand in your house can damage your floor’s finish and cause the wood to look faded.
Dust also causes the wood to expand and shrink, causing it to warp over time. By sweeping and/or vacuuming daily, you’re keeping your floors dust-free and preventing the wood from warping.
When you sweep, make sure you sweep from a wall so you don’t knock dust onto the floor. Also, sweep across the room, not up and down.
Vacuuming daily also keeps your floors dust-free and prevents the wood from warping. Place the vacuum near the wall so it doesn’t knock dust onto the floor.
Mop with warm water and a disinfecting agent
Most floors don’t need mopping with disinfecting agents, but when you clean with disinfecting agents, you should mop with warm water.
Warm water helps balance the pH of the floor, which is important if your floor is finished with a varnish or other type of finish.
Disinfecting agents are usually used to kill germs and bacteria, which can cause infections and diseases.
Make sure you don’t leave germs and bacteria behind when you clean. Mopping with disinfecting agents is a little tricky since you don’t want to soak the floor too long or you risk damaging your floor.
A good rule of thumb is to wait for the floor to be damp, then mop it again with clean water.
Spot clean with dish soap and water
If you have a mess on the floor that you can’t wait to get out of, you can use dish soap and water to get it clean.
Make sure you use dish soap that’s designed for your floor. Many dish soaps are too harsh for floors, which can strip the finish off the floor and cause damage.
If you have a spill that’s difficult to clean, use dish soap and water to get it cleaned up. Clean up spills as soon as they happen instead of letting them sit on the floor.
You’re less likely to have to do costly renovations because you know your floor will last longer. If you have a stain on your floor, you can use a damp sponge and dish soap to get it up.
Make sure you don’t scrub the floor too hard; you want to just get the stain up and off the floor. You can use a clean damp sponge to get the stain up.
Use an all-purpose cleaner for stubborn dirt and stains
When you notice a stain or streak on the floor, you can use an all-purpose cleaner to get it up. Many all-purpose cleaners are designed to get stains out, but you can use them to clean up dirt and dust, too.
Make sure you wait until the floor is dry before moving furniture or walking on the floor. You don’t want to risk damaging your floor by walking on it before it’s dry.
Cleaning with a cleaning product designed for floors is a great way to save money and maintain the look of the floor.
Mop again with a more aggressive mop-water mixture
If you have stubborn dirt and stains on your floor, you can use a more aggressive mop water mixture. This means you’re adding a little more soap to the floor mop water.
This can help with tough dirt and stains that your other mops can’t get up. Just make sure you follow the same mop water instructions as you do when you’re using a basic floor mop.
You don’t want to soak your floor too long or you risk damaging your floor.
Damp mop using a floor pad and spray bottle
If you have stubborn stains or dirt on your floor, you can use a floor pad and spray bottle to clean it up. You should start by cleaning the floor with a floor pad and then spraying off the pad with the spray bottle.
Make sure you follow the same mop water instructions as you would when you’re using a basic floor mop. Don’t soak your floor too long.
Use a microfiber mop for the final polish and shine
A microfiber mop is the best way to clean your floors. The material is soft, and it picks up dirt, dust, and grime easily.
You can use it for both cleaning and polishing your floors. You should spray your microfiber mop with water and use it to clean your floor.
Make sure you follow the same mop water instructions as you would with a basic floor mop.
Vinyl plank floors are one of the best ways to update your home and give it a brand-new look. With the right tools, cleaning your floors doesn’t require any special skills and can be done by almost anyone.
That being said, you do need to take some basic steps to keep your floor clean and free of dirt and dust. When you follow these steps, your vinyl plank floors will stay clean and look great for years to come.